System Board - HP EliteBook 8560w Maintenance And Service Manual

System board

NOTE:
bracket.
NOTE:
dual-core processors have two memory slots.
Description
For use with dual-core processors
(Alcor chip upgrade) For use with dual-core processors
For use with quad-core processors
(Alcor chip upgrade) For use with quad-core processors
For use with dual-core processors in China and Ukraine
(Alcor chip upgrade) For use with dual-core processors in China and Ukraine
For use with quad-core processors in China and Ukraine
(Alcor chip upgrade) For use with quad-core processors in China and Ukraine
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a.
b.
c.
d.
e.
f.
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SIM (see
●
Memory modules (see
Downloaded from LpManual.com Manuals
All system board spare part kits include replacement thermal material and VGA support
Models that support quad-core processors have four memory slots. Models that support
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Top cover (see Top cover on page
Video card fan/heat sink assembly (see
Processor heat sink (see
SIM on page 49)
Expansion memory modules on page
48).
Service access cover on page
60)
65)
67)
71)
Video card fan/heat sink assembly on page
Processor heat sink on page
Spare part number
652637-001
684318-001
652638-001
684319-001
656213-002
684320-001
656214-002
684321-001
50).
86)
51)
Component replacement procedures 107
84)