Video Card Fan/Heat Sink Assembly - HP EliteBook 8560w Maintenance And Service Manual

Video card fan/heat sink assembly

Description
Video card fan/heat sink assembly for use in computers with AMD FirePro M5950 and NVIDIA
Quadro 1000M graphics cards
Video card fan/heat sink assembly for use in computers with AMD FirePro M5950 for eSTAR
Video card fan/heat sink assembly for use in computers with NVIDIA Quadro 2000M graphics
cards
Before removing the video card fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the video card fan/heat sink assembly:
1. Position the computer right-side up, with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Remove the three Torx 9M2.5×6.0 screws (2) that secure the fan to the base enclosure.
NOTE:
4. Loosen the four captive screws (3) that secure the video card heat sink to the base enclosure.
84 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
The screw closest to the display may be hidden under display cables.
48).
Service access cover on page
60)
65)
67)
71)
Spare part number
652675-001
670940-001
652677-001
50).