Audio/Usb 3.0 Board - HP EliteBook 8560w Maintenance And Service Manual

Audio/USB 3.0 board

Description
Audio/USB 3.0 board (select models only)
Before removing the audio/USB 3.0 board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Video card fan/heat sink assembly (see
f. Processor heat sink (see
g. Processor (see
h. Modem module (see
Remove the audio/USB 3.0 board:
1. Turn the computer right-side up, with the front toward you.
2. Remove the three Torx 9M2.5×4.0 screws (1) that secure the audio/USB 3.0 board to the
system board.
94 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 48).
Service access cover on page
Hard drive on page 60)
Optical drive on page
Keyboard on page 67)
Top cover on page 71)
Processor heat sink on page
Processor on page 90)
Modem module on page
65)
Video card fan/heat sink assembly on page
86)
92)
Spare part number
652668-001
50).
84)