Usb/Audio Board Cables - HP ProBook x360 11 G5 Education Edition Maintenance And Service Manual

USB/audio board cables

NOTE: The USB/audio board cables are included in the Cable Kit, spare part number L83959-001.
Before removing the USB/audio board cables, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the USB/audio board cables:
1. Release the ZIF connectors (1) to which the USB/audio board cables are connected, and then disconnect
the USB/audio board cables from the USB/audio board.
2. Release the ZIF connectors (2) to which the USB/audio board cables are connected, and then disconnect
the USB/audio board cables from the system board.
3. Remove the USB/audio board cables (3).
Reverse this procedure to install the USB/audio board cables.
46 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page 40).
29).