WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
2
Replace the two screws (M2x3) securing the fan to the palm-rest and keyboard assembly.
3
Connect the fan cable to the system board.
4
Adhere the tape that secures the fan cable to the palm-rest and keyboard assembly.
Post-requisites
Replace the
base
cover.
40
Replacing the fan
computer. After working inside your computer, follow the instructions in
Replacing the fan
After working inside
www.dell.com/
21