Outputting Color Bars - Sony F35 Operation Manual

WIPE
When MIX TYPE is set to WIPE, how pictures are to be
wiped can be selected.
Item Setting
LAYOUT HOR
VERT
PB RIGHT
POSITION
LEFT
BOTTOM
TOP
BOUNDARY With HOR:
0-1920
With VERT:
0-1080
To display the gamma mark
GAMMA MARK SETTING
When monitor gamma (ITU-R709) is applied to the SDI
output at the MONITOR OUT connectors and the
viewfinder images, you can set the camera to display the
gamma mark (709 ) to indicate that gamma that is
different from that used for recording is applied. (The mark
is not recorded with the docked recorder.)
Select GAMMA MARK SETTING on the <PB/MONI
GAMMA> page to jump to the subpage for setting the
gamma mark.
<GAMMA MARK> page
< G A M M A M A R K >
M O N I G A M M A M A R K :
M A R K L E V E L
H P O S I T I O N
V P O S I T I O N
Set MONI GAMMA MARK to ON then set the brightness
and position of the indication.
46
Setting the Camera Outputs
Content
Horizontally split (Default)
Vertically split
With HOR, the playback picture
is displayed on the right and the
camera image on the left.
(Default when HOR is selected)
With HOR, the playback picture
is displayed on the left and the
camera image on the right.
With VERT, the playback picture
is displayed in the lower part
and the camera image in the
upper part. (Default when VERT
is selected)
With VERT, the playback picture
is displayed in the upper part
and the camera image in the
lower part.
The boundary position can be
changed. (Default: with HOR:
960, with VERT: 540)
E S C
O N
B
: 3
: 0
: 0
Item Function
MARK LEVEL For selecting the brightness of the gamma
mark among 1–4 (4 for the maximum
brightness)
H POSITION For setting the horizontal position of the
indication in the range of 0–99 (0 for the
leftmost)
V POSITION For setting the vertical position of the
indication in the range of 0–99 (0 for the
uppermost)

3-5-3 Outputting Color Bars

The color-bar signal can be output by setting the color-bar
generator built in the camera to ON.
The color-bar generator can be turned ON or OFF on the
<OTHERS 1> page of the USER (MAINTENANCE)
menu.
<OTHERS 1> page
< O T H E R S 1 >
F A N M O D E
C A M B A R S
H D - B A R ( V F / M O N I )
B A R 1 6 : 9 ( 1 0 0 % )
S D - B A R
S M P T E
I M A G E I N V E R T
I R I S C L O S E
M O N I R E M O T E R E C
When CAM BARS is set to ON, the color-bar generator is
turned ON, and the color-bar signal is output.
As the HD and SD (VBS) outputs for the viewfinders and
monitors, the format of the color-bar signals can be
independently selected.
The color-bar signal format for the camera output of the
main line is fixed at 16:9 (100%), regardless of the settings
of the above outputs.
HD-BAR (VF MONI)
The format of the color-bar signals sent to the VF1, VF2,
and MONITOR OUT HD-SDI connectors can be selected
from among the 17 types.
SD-BAR
The format of the color-bar signals to the TEST OUT and
REMOTE connectors can be selected from among the 5
types.
U 2 0
: A U T O 1
: O N
B
: O F F
: O F F
: O F F