Adjusting The Viewfinder Details - Sony F35 Operation Manual

Example: Safety zone marker (90%)
The <CHAR/MARK MIX> page and <MARKER
SETTING> page of the USER (OPERATION) menu allow
you to switch the display of the markers on or off and to set
the display conditions of the markers.
Activating/deactivating all the marker
indications for each output
The <CHAR/MARK MIX> page permits you to activate
and deactivate the marker indications for each output.
<CHAR/MARK MIX> page
< C H A R / M A R K M I X >
V F 1 V F 2 M O N I V B S
C H A R :
M A R K E R :
B
C U R S O R : O F F O F F O F F
Z E B R A : O F F O F F O F F
C H A R / M A R K L E V E L : 5 0
V F G A T E M A R K E R : O F F
The MARKER indications are activated for all the outputs
at the factory.
Item Setting
VF1 Turn all the markers on or off on the
viewfinder connected to the VF1 connector.
VF2 Turn all the markers on or off on the
viewfinder connected to the VF2 connector.
MONI Turn all the markers on or off on the monitors
connected via the MONITOR OUT
connectors.
VBS Turn all the markers on or off on the monitors
connected via the TEST OUT and REMOTE
connectors.
The CHAR/MARK LEVEL line permits you to adjust the
brightness (0 to 50) of the character and marker
indications.
Specifying the markers to be displayed
For the outputs for the total marker indication is activated
on the <CHAR/MARK MIX> page, select and adjust the
marker(s) to be displayed on the next <MARKER
SETTING> page.
50
Viewing and Setting the Viewfinder Displays
U 0 9
O N O N O N O N
O N O N O N O N
O F F
<MARKER SETTING> page
< M A R K E R S E T T I N G > U 0 3
C E N T E R :
B
S A F E T Y : O F F
E F F E C T I V E : O F F
A S P E C T : O F F
V A R I A B L E : - -
S A F E T Y : O F F
M A S K : O F F
C U R S O R : B O X
P O S I H / V :
S I Z E W / H :
All the markers have been set to OFF at the factory.
Item Setting
CENTER Set to ON to display the center marker and
select the type of the center marker.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY Set to ON to display the safety zone marker
and specify the range (80%, 90%, 92.5%, or
95%).
EFFECTIVE Set to ON to display the effective pixel area.
ASPECT Set to ON to display the aspect marker and
specify the aspect:
2.40:1, 2.35:1, 1.85:1, 1.66:1, 16:9, 15:9,
14:9, 13:9, 4:3, VAR H, VAR V
VARIABLE If you select VAR H or VAR V for ASPECT,
set the H or V value.
VAR H: 12 to 1920
VAR V: 12 to 1080
SAFETY Set to ON to display the safety zone for the
selected aspect marker, and specify the
range.
MASK Set to ON to make the areas outside the
selected aspect marker dimmer, and select
the mask level (0 to 15).
3-6-5 Adjusting the Viewfinder
Details
You can adjust the image on the viewfinder screen to
obtain a clearer view, using the <VF DETAIL> page of the
USER (OPERATION) menu. This adjustment does not
affect the image being recorded.
O F F 1
9 0 . 0 %
4 : 3
9 0 . 0 %
1 2
0 0
9 6 0 5 4 0