Brightness Adjustment Of The Subdisplay - Sony F35 Operation Manual

Functions that can be allocated to assignable
switch 4
Menu Function
indication
AWB Automatic white balance adjustment
BARS Color-bar indication
TEST1 Test signal output
OFF None
Note
Even if AWB is allocated to assignable switch 4, AWB
does not function in Cine mode.
Assignable buttons 1/2 setting page
AS1:OFF
AS2:OFF
The functions of buttons 1 and 2 can be assigned on the
first and second line, respectively.
Assignable button 3/switch 4 setting page
AS3:OFF
AS4:OFF
The functions of button 3 and switch 4 can be assigned on
the first and second line, respectively.
3-2-12 Brightness Adjustment of the
Subdisplay
The brightness of the subdisplay can be adjusted, in eight
levels.
Subdisplay brightness adjustment page
BRIGHT:1
The higher the value, the brighter the display.
3-2-13 Selection of Gamma Tables
The gamma curves can be selected on the gamma table
selection page of the subdisplay.
Gamma table selection page
GAMMA:STANDARD
5 ITU-R709
40
Basic Settings with the Subdisplay
Select the gamma table on the first line (STANDARD,
HYPER, SPECIAL, or USER) and the gamma curve on
the second line.
For details on the available gamma curves, see "3-11
Selecting the Gamma" on page 56.
3-2-14 Selection of Color Spaces
Color reproducibility can be selected on the color space
selection page of the subdisplay.
Color space selection page
COLOR SPACE
F900
Select the color space mode (S-GAMUT, F900, F900R, or
DCDM REF PJ) on the second line.
For information on color space modes, see "3-1-2
Switching of the Basic Operation Modes" (page 30) and
"Color Space According to the COLOR SPACE Settings"
(page 123).
3-2-15 Checking the Optical Levels
When the SRW-1 is connected via the optional CA-F101
Optical Fiber Camera Adapter, you can check the optical
levels on the optical status page.
Optical status page
CAM:
xxxxxxxx
VTR:
xxxxxxxx
CAM: Optical reception level on the camera side
VTR: Optical reception level on the SRW-1 side
The status of the level is indicated with eight segments.
If 6 to 8 segments are lit: Normal
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
For details, refer to the Operation Manual of the CA-F101.
3-2-16 Limiting Pages that are
Displayed on the Subdisplay
You can limit pages that are displayed on the subdisplay.
Use Setup mode of the subdisplay or the OPERATION
menu.
b
b