Using The Rm-B750 - Sony F35 Operation Manual

Appendixes

Using the RM-B750

When the RM-B750 Remote Control Unit (optional) is
connected, you can control the menu settings of this
camera and monitor the camera images on the display of
the RM-B750.
Connection
Using the remote control cable supplied with the RM-
B750, connect the CAMERA connector of the RM-B750
and the REMOTE connector of the camera.
REMOTE
Operating the Menu of This Camera
The menu of this camera can be displayed on the display
of the RM-B750 and be set from the RM-B750.
Settings on this camera
• Set RM VIDEO to VBS on the <MONITOR OUTPUT>
page of the USER (OPERATION) menu.
• Set VBS of CHAR to ON on the <CHAR/MARK MIX>
page of the USER (OPERATION) menu.
• Set NS MODE to LEGACY on the <700PTP
SETTING> page of the NETWORK menu.
102
Using the RM-B750
RM-B750
PANEL STANDARD MONITOR TEST BARS CLOSE VTR
ACTIVE START/STOP
MEMORY
5600K AUTO SKIN BLACK KNEE
STICK
KNEE DETAIL GAMMA SATURATION
ABB
AWB
WHITE
FUNCTION
CAMERA
ABS
BLACK
MAINTE
NANCE
SCENE
AUTO IRIS/MB
IRIS ACTIVE MASTER
BLACK
PAINT
EXT
IRIS
ALARM
REMOTE CONTROL UNIT
Settings on the RM-B750
MONITOR button
MONITOR
Maintenance Menu
Auto
Adjusting
FUNCTION
Setup
VF DISP
MAINTENANCE
VF MENU
RM
LCD
Config
SCENE
CANCEL
PAINT
ENTER
MENU SELECT
BRIGHT
MAINTENANCE menu
MAINTENANCE/VF MENU button
1
Press the MAINTENANCE/VF MENU button to
display the maintenance menu on the LCD/touch
panel.
2
Press [RM Config] on the touch panel to display the RM
configuration menu.
3
Press [Security] to set the unit to Engineering Mode.
4
Press [SW Setting] to change to the SW Setting display
and set the VF Menu to Control Enable.
5
Press [Exit] to cancel the menu mode.
If you press the MONITOR button, a menu page of this
camera will be displayed on the display of the RM-B750.
Pressing the MAINTENANCE/VF MENU button enables
the menus of this camera to be set from the RM-B750.
For details on the operations, refer to the Operation
Manual of the RM-B750.
Camera
File
Config
Super
Motion
Memory
Stick
CONTRAST
[RM Config]