Brightness Adjustment Of The Subdisplay; Selection Of Gamma Tables; Selection Of Color Spaces; Limiting Pages That Are Displayed On The Subdisplay - Sony Owner’s Guide Operational Manual

Menu Function
indication
GAIN –9/–18 dB If the picture becomes too bright when
you set the lens iris to its open end to
assist the focus adjustment, the electric
gain can be temporarily decreased to
resume the proper picture level by using
this function.
Each push on the assignable button
changes the setting in the sequence of
OFF, –9 dB, –18 dB, OFF, and so on.
Notes
• The gain-decreased condition is
automatically released in approx. 1
minute.
• Do not perform recording in the
condtion where the gain is decreased
with this function.
OFF None
Functions that can be allocated to assignable
switch 4
Menu Function
indication
AWB Automatic white balance adjustment
BARS Color-bar indication
TEST1 Test signal output
OFF None
Note
Even if AWB is allocated to assignable switch 4, AWB
does not function in Cine mode.
Assignable buttons 1/2 setting page
AS1:OFF
AS2:OFF
The functions of buttons 1 and 2 can be assigned on the
first and second line, respectively.
Assignable button 3/switch 4 setting page
AS3:OFF
AS4:OFF
The functions of button 3 and switch 4 can be assigned on
the first and second line, respectively.
3-2-11 Brightness Adjustment of the
Subdisplay
The brightness of the subdisplay can be adjusted, in eight
levels.
36
Basic Settings with the Subdisplay
Subdisplay brightness adjustment page
BRIGHT:1
The higher the value, the brighter the display.

3-2-12 Selection of Gamma Tables

The gamma curves can be selected on the gamma table
selection page of the subdisplay.
Gamma table selection page
GAMMA:STANDARD
5 ITU-R709
Select the gamma table on the first line (STANDARD,
HYPER, SPECIAL, or USER) and the gamma curve on
the second line.
For details on the available gamma curves, see "3-11
Selecting the Gamma" on page 51.

3-2-13 Selection of Color Spaces

Color reproducibility can be selected on the color space
selection page of the subdisplay.
Color space selection page
COLOR SPACE
F900
Select the color space mode (S-GAMUT, F900, F900R, or
DCDM REF PJ) on the second line.
For information on color space modes, see "3-1-2
Switching of the Basic Operation Modes" (page 27) and
"Color Space According to the COLOR SPACE Settings"
(page 117).
3-2-14 Limiting Pages that are
Displayed on the Subdisplay
You can limit pages that are displayed on the subdisplay,
using the <PAGE SELECT> subpage that can be accessed
from the <SUBDISPLAY 2> page of the USER
(OPERATION) menu.
For details on how to operate the menu, see "4-2 Basic
Menu Operations" (page 57).