Brinkmann Smoke'N Grill Professional Owner's Manual page 25

Side
Burner
Valve
Valve
Nozzle
Side Burner
Control Knob
Burner Venturi
Bezel
Step 5
Attach side burner assembly to
right side of grill body assembly.
Place side burner assembly
keyholes over the pre-attached
bolts and slide back. Tighten
securely. Fasten right side table
front panel to grill body with one
M6 x 10 mm bolt.
Step 6
Insert the pre-attached screws in
the side burner valve assembly
through the holes in the side burner
front panel, then fi rmly seat the
valve nozzle into the burner venturi.
Slide the burner valve assembly
down in the keyholes on the side
burner control knob bezel as
shown to lock in place. Tighten with
screwdriver.
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
Step 7
Install side burner control knob onto
valve stem.
24