Special Procedures; Turn Over; Vehicle Immersion - Can-Am 2007 Outlander 500 EFI Operator's Manual

SPECIAL PROCEDURES

Turn Over

When vehicle is turned over or stays
tilted on the side, replace the vehicle
in its normal operating position (on all
four wheels) and wait 3 to 5 minutes
before starting engine.
Before starting engine, check engine
oil level and refill if necessary. If the oil
pressure light stays ON after starting
engine, stop engine and see an autho-
rized Can-Am dealer as soon as possi-
ble.

Vehicle Immersion

Should the vehicle become immersed,
it will be necessary to take it to an
authorized Can-Am dealer as soon as
possible. DO NOT START THE EN-
GINE!
CAUTION: Immersion of the vehi-
cle can cause serious damage if the
correct restart procedure is not fol-
lowed.
_____________________
89