Winch Operation; Stopping The Engine; Post-Operation Care - Can-Am 2007 Outlander 500 EFI Operator's Manual

V07I0EY
2WD MODE
When the selector is located on the
2WD, the vehicle is in 2 wheel drive
at all time.

Winch Operation

XT Models
See the BASIC GUIDE TO WINCHING
TECHNIQUES. This manual should be
kept in the tool kit and remain in the
vehicle at all times.

Stopping the Engine

WARNING
Avoid parking on slope.
Release throttle and completely stop
the vehicle.
Apply the parking brake.
Set transmission lever in PARK posi-
tion.
Push the engine stop switch in OFF
position.
Turn key in ignition switch to OFF po-
sition.
______________________
88
Remove key from ignition switch.

Post-Operation Care

When vehicle is used in salt-water
environment (beach area,
ing/loading boats etc.), rinsing the
vehicle with fresh water is necessary
to preserve vehicle and its compo-
nents. Metallic parts lubrication is
highly recommended. Use XP-S Lube
(P/N 293 600 016) or an equivalent.
This must be performed at the end of
each operating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle. USE
LOW PRESSURE ONLY (like a gar-
den hose). High pressure can cause
electrical or mechanical damages.
launch-