Roller Fairlead; Winch Remote Control - Can-Am 2007 Outlander 500 EFI Operator's Manual

NOTE: A winch remote control is al-
so provided with the vehicle to ease
winch operation if necessary, refer to
WINCH REMOTE CONTROL further in
this section.
vmo2006-016-001_b
TYPICAL
1. In
2. Out

24) Roller Fairlead

XT Models
The roller fairlead is used to prevent
damages to the vehicle and guide the
wire rope into the winch.
vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook

25) Winch Remote Control

XT Models
A winch remote control is provided
with the vehicle to ease winch oper-
ation if necessary.
The winch remote control is located in
the access panel of the front service
compartment.
vmo2007-003-001_a
FRONT ACCESS PANEL
1. Winch remote control
To use the winch remote control
switch instead of the handlebar con-
trol switch, connect the remote con-
trol into the provided connection of
the front service compartment.
CAUTION: Always disconnect and
store the remote control when not
in use.
vmo2007-003-017_a
FRONT SERVICE COMPARTMENT
1. Remote control connection
Refer to BASIC GUIDE TO WINCHING
TECHNIQUES for more informations.
_____________________
79