Parking Brake; Transmission Lever - Can-Am 2007 Outlander 500 EFI Operator's Manual

1
2
V07K01Y
TYPICAL
1. Brake lever
2. To apply brakes

4) Parking Brake

When applied, it prevents the vehicle
from moving. Useful when the brake
needs to be locked for example when
doing a K-turn, during transportation or
when the vehicle is not in operation.
WARNING
Always use the parking brake and
engage the PARK position on the
transmission lever when the vehi-
cle is not in operation.
WARNING
Make sure parking brake is fully
disengaged before operating the
vehicle.
When you ride the vehicle, brakes
that are caused to drag by a con-
tinuous pressure on the lever may
cause damage to the brake system
and cause loss of braking capacity
and/or fire.
To engage mechanism:
brake lever and maintain while mov-
ing lever lock. Brake lever is now
compressed and applying all brakes.
______________________
66
V07K02Y
TYPICAL
1. Brake lever lock
2. Press to apply parking brakes
To release mechanism:
brake lever. Lever lock should auto-
matically return to its original position.
Brake lever should return to rest po-
sition. Always release parking brake
before riding.

5) Transmission Lever

A 5-position lever: P, R, N, H and L.
To change the transmission position,
completely stop vehicle then move
lever to the desired position. Do not
force lever. If unable to shift, rock
the vehicle back and forth to move
the gears in the transmission and try
again.
Squeeze
vmo2006-007-007
SHIFT PATTERN
2 1
Squeeze