Tool Kit; Dipstick; Winch; Winch Control Switch - Can-Am 2007 Outlander 500 EFI Operator's Manual

vmo2006-007-031_a
REAR — FUSES LOCATION
1. (F8) Main (30 A)
(F9) Main accessories (30 A)

20) Tool Kit

The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this Opera-
tor's Guide and the BASIC GUIDE TO
WINCHING TECHNIQUES with the
XT models.
The tools included in the tool kit are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– shock absorber key (1)
– fuse 30 A (1)
– fuse 20 A (1)
– fuse 15 A (1).

21) Dipstick

Allow to check the oil level in the en-
gine.
______________________
78
vmo2006-007-013_a
1. Dipstick
Refer to LIQUID to check the engine
oil level correctly.

22) Winch

XT Models
vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook

23) Winch Control Switch

XT Models
Use this switch to roll in or out wire
from winch.
To take out wire from winch, press the
left side of switch.
To get wire into the winch, press the
right side of switch.
Refer to BASIC GUIDE TO WINCHING
TECHNIQUES for more informations.