Scan to file
Procedure
1.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2.
Touch [Jobs] -> [Copy/Scan].
3.
Select a scan-to-file profile.
The job window opens.
4.
Change the settings for the original and the file.
5.
Touch [Start]
The scanner scans the originals. The system sends the resulting file to the scan server. The file is
stored with a predefined name in a designated directory. There is no message on the operator
panel to inform you that the file was stored successfully. You can access the status information
on the controller.
.
Chapter 10 - Carry out scan jobs
Scan to file
277