The stacker/stapler, optional inserter and optional integrated punch unit
7
8
Internal view
[9] The finisher module
Main parts
1
2
Finishing options
IMPORTANT
• Do not place anything other than output paper in the trays of the finisher, as doing so may
damage the trays.
• Do not place anything under the trays of the finisher, as doing so may damage the trays.
34
Chapter 2 - Main parts
Component
Upper tray
Inserter
2
Component
Punch waste tray
Staple waste tray
Function
Receives finished documents
The inserter is used to feed cover sheets
for printed documents and booklets. The
inserter is also an option for the Finisher-
AJ1.
1
Function
Pull out the punch waste tray to remove
punch waste.
Pull out the staple waste tray to discard
the staple waste.