Set Sensor, Scan Front Sensor; Transport Roller - Olivetti d-Copia 200D Service Manual

4)
D. Set sensor, scan front sensor
1) Remove the set sensor.
2) Remove the scan front sensor.
3) Disconnect the connectors.
∗ When assembling, attach the blue harness to the marking B
side of the sensor, and attach the orange harness to the oppo-
site side sensor.
3)
E. Transport roller
1) Remove the actuator.
2) Remove the transport roller.
3) Remove the gear and the bearing.
8-18
1)
2)
3)
1)
2)
3)
3)
2)
1)
Service Manual Y109500-5