Olivetti d-Copia 200D Service Manual page 88

Program
Mode
No.
25 Copy effective paper width
setting function (Bypass
tray)
26 Copy effective paper width
setting function (Tray)
28 Selection of copy start
state (Polygon rotation on/
off)
29 Fusing temperature
setting when the bypass
tray is used
∗ Factory default settings are indicated with an asterisk (*).
5) Press the start ( ) key. The right-hand number in the display
will be steadily lit and the entered value will be stored.
Note: To change the setting or to set another mode, press the
clear key. The unit will return to step 2).
6) Press the light ( ) key to return to the normal copy mode.
11-2
Parameters
*1 → Large (A4 width/
LETTER), 2 → Small (B5R
width/INVOICE)
*1 → Large (A4 width/
LETTER), 2 → Small (B5R
width/INVOICE)
*1 → ON, 2 → OFF
1 → Low, *2 → High
Service Manual Y109500-5