Olivetti d-Copia 200D Service Manual page 73

Main Sub
code code
26 42 Transfer ON timing control setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key, and the setting will be changed. (For any number different from the
following ones, the default time is automatically set.)
Code number
0
1
2
3
4
5
6
7
8
9
10
43 Side void setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the side void amount is displayed.
2. Enter the code number and press the START key. The setting is changed.
Code number
0
1
2
3
4
5
6
7
8
9
10
γ life correction setup
54
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key. The setting is changed.
Code number
0
1
62 Energy-save mode copy lamp setup
Used to set half-ON (50%)/OFF of the copy lamp in the pre-heat mode.
When this simulation is executed, the current setup of the code number is displayed. Enter the code number and press the
PRINT switch to enable the setup.
Code number
0
1
30 01 Paper sensor status display
Indicates the paper sensor status using the lamps on the operation panel.
Before-resist paper sensor (PPD1)
Fusing section paper sensor (PPD2)
Paper exit sensor (POD)
2nd CS paper sensor (PPD3)
New drum cartridge sensor (PUIS)
Y109500-5
Setting
Default (236 msec)
–20 msec
–18 msec
–16 msec
–14 msec
–12 msec
–10 msec
–8 msec
–6 msec
–4 msec
–2 msec
Setting
0 mm
0.5 mm
1.0 mm
1.5 mm
2.0 mm * Default
2.5 mm
3.0 mm
3.5 mm
4.0 mm
4.5 mm
5.0 mm
γ life correction
OFF
ON
Setup
Copy lamp OFF
Copy lamp half-ON (50%) * Default
Sensor name
Service Manual
Content
Code number
11 Default (236 msec)
12 +2 msec
13 +4 msec
14 +6 msec
15 +8 msec
16 +10 msec
17 +12 msec
18 +14 msec
19 +16 msec
20 +18 msec
21 +20 msec
Display lamp
Developer cartridge replacement lamp
JAM lamp
Photoconductor cartridge replacement lamp
2nd cassette lamp
Zoom lamp
Setting
10-7