Fip1.36 Pwba Exit Motor - Oki B6500 Troubleshooting Manual

FIP1.36 PWBA EXIT MOTOR

Step
Possible causes:
PWBA EXIT MOTOR (PL12.1.4)
HARNESS ASSY LVPS (PL12.1.1)
LVPS (PL12.1.5)
HVPS/MCU (PL12.1.19)
Checking HARNESS ASSY LVPS for continuity
Disconnect P/J27, P/J10, P/J102 and P/J101 from
1 HARNESS ASSY LVPS.
Is there continuity between
J27 and J102?
Checking PWBA EXIT MOTOR power source voltage.
2 Disconnect P/J101 from PWBA EXIT MOTOR.
Is the voltage across J101-2(+) and J101-1(-), 24 VDC?
Checking PWBA EXIT MOTOR.
3 Replace PWBA EXIT MOTOR. (RRP12.2)
Is the problem cleared, after replacement?
Check
1 – 57
Chapter 1 Troubleshooting
Yes
Replace HAR-
Go to step 2.
NESS ASSY LVPS.
Replace LVPS.
Go to step 3.
(RRP12.3)
Replace HVPS/
End of work
MCU. (RRP12.10)
No