Planning Your Schedule - Robertshaw 300-224 Installation And Programming Instructions

PLANNING YOUR SCHEDULE

Your new Robertshaw programmable thermostat has been designed so that you can select
either 2 program periods (Day and Night) or 4 program periods (Morning, Day, Evening and
Night). The thermostat comes from the factory set for 4 program periods. To change this setting,
please refer to the "2 Events or 4 Events Per Day" section on page 8.
To help save programming time, we suggest you use the worksheet below to set-up your
specific program.
Note: If you plan to use the automatic changeover mode, you cannot set your heating and cool-
ing temperatures closer than 2 degrees apart for the same program period.
Programming Chart
PROGRAM PERIOD
Temperatures Heat:
Cool:
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
✣
MORNING
Heat:
Cool:
(Time)
(300-225, 300-227, 300-229)
✥
DAY EVENING
Heat:
Cool:
(Time)
25
✤
NIGHT
Heat:
Cool:
(Time) (Time)
✠