Temperature Override - Robertshaw 300-224 Installation And Programming Instructions

TEMPERATURE OVERRIDE

Temporary Override (3 hours)
You may change the temperature setting temporarily at any time without affect-
ing the program.
Press the
will be displayed. Press the
temperature will be maintained for three hours. To cancel, simply press the
RESUME button.
Temporary Override with Keyboard Locked (1 hour) (300-225, 300-227, 300-229)
You may change the temperature setting temporarily at any time without
affecting the program, even though they keypad is locked.
• Press the
event. Press the
+/-3 degrees. This temperature will be maintained for one hour.
Continuous Override (Hold)
You also may maintain a constant temperature setting at any time without affecting the program.
1. Press and release the MODE button until the desired mode is displayed (HEAT – AUTO – OFF
– COOL)
2. Press and release the HOLD button. HOLD will be displayed.
3. Press the or
indefinitely. To cancel, simply press the RESUME button.
Note: If the auto mode is used, press the MODE button, then press the
heating setpoint. Press the MODE button, and then press the
setpoint.
or buttons. The current event temperature and mode of operation
or buttons. The display will show the temperature for the first
or
buttons to adjust the temperature. This temperature will be maintained
or buttons again to adjust the temperature. This
buttons again to adjust the temperature
or
28
or buttons to select a
buttons to select a cooling