Framing Shots With The Freeze Mix Function - Sony PXW-X320 Operating Instructions Manual

OPERATION >Format in setup menu
HD System System
Line Frequency
720 59.94P/50P
29.97P/25P
23.98P
exFAT/HD
OPERATION >Format in setup menu
HD System System
Line Frequency
1080 59.94i/50i
29.97P/25P/
23.98P
720 59.94P/50P
29.97P/25P
23.98P
Shooting in 2-slot Simul Rec mode
1
Insert media in both card slot A and
card slot B.
2
Set "OPERATION" > "Rec Function"
> "Simul Rec" to "Simul" in the setup
menu.
The recording mode/operation status
indicator (page 25) changes to "SML STBY"
on the viewfinder screen.
3
Start recording as described in step
"Basic Operations" (page 87).
When recording starts, the "SML STBY"
indication on the viewfinder screen changes
to "zSML REC" indication.
Rec Format
HD422 50
HD420 HQ1280
HD422 50
HD422 50
HD420 HQ1280
Rec Format
XAVC-I
XAVC-L50
XAVC-L35
XAVC-L25
HD422 50
HD420 HQ1920
HD420 HQ1440
XAVC-I
XAVC-L50
XAVC-L35
HD422 50
HD420 HQ1920
HD420 HQ1440
XAVC-I
XAVC-L50
HD422 50
HD420 HQ1280
HD422 50
HD422 50
HD420 HQ1280
9
of
4
Stop recording as described in step
"Basic Operations" (page 87).
Notes
• The 2-slot Simul Rec function cannot be used at the
same time as the Picture Cache Rec, Interval Rec,
Frame Rec, Slow & Quick Motion, or Clip Continuous
Rec function.
• The 2-slot Simul Rec function cannot be set during
recording, playback, or thumbnail display.
• If one of the cards in the slots becomes full during
recording, normal recording to the other card will
continue for as long as possible. Even if the card is
replaced while normal recording is in progress,
simultaneous or relay recording will not be performed.
• If a card was inserted in only one of the slots or if one
of the cards was full when simultaneous recording to
both slots was started, normal recording to the
available card will be performed.
• The IFU-WLM3 cannot be used when recording
simultaneously to both slots.
Framing Shots with the Freeze
Mix Function
The freeze mix function allows you to
temporarily overlap a still image (freeze picture)
from a clip shot in HD mode onto the current
camera picture. This makes it easier to frame the
shot.
Note
The freeze mix function is not available in the following
cases.
• When the recording format is SP 1440/23.98P
• When the video formats of the recorded picture and the
camera picture differ
• When you are shooting in Slow & Quick Motion mode
or slow shutter mode
• When there is i.LINK input
To display a freeze mix picture
1
Play a clip or conduct a recording
review of a clip with the same format as
the camera picture.
2
Display the picture that you want to use
as the frame, and then turn on the
assignable switch to which the Freeze
Mix function has been assigned.
The recording review picture is frozen and
overlaps the camera picture.
96
9
of