Clip Continuous Rec settings and
shooting
Notes
• The Clip Continuous Rec function cannot be used at
the same time as the Picture Cache, Interval Rec,
Frame Rec, or Slow & Quick Motion function. When
you select Clip Continuous Rec mode, the Picture
Cache, Interval Rec, Frame Rec, and Slow & Quick
Motion functions are disabled. When you select
picture cache, Frame Rec, Interval Rec, or Slow &
Quick Motion mode, the Clip Continuous Rec function
is disabled.
• The Clip Continuous Rec function is disabled when the
recording mode is FAT.
To make Clip Continuous Rec settings
1
Select OPERATION >Rec Function
>Clip Continuous Rec in the setup
menu.
See “Basic Setup Menu Operations” (page 107)
for more information about menu operations.
2
Turn the MENU knob to select [On],
and then press the knob.
“CONT” appears in the viewfinder, and the
function is enabled.
You can assign the Clip Continuous Rec on/off
function to one of the ASSIGN 1/2/3 switches,
ASSIGNABLE 4/5 switches, and the COLOR
TEMP button.
For details, see “Assigning Functions to Assignable
Switches” (page 154).
To shoot in Clip Continuous Rec mode
Shoot as described in “Basic Operations”
(page 72).
When recording starts, the “Cont” indication in
the viewfinder changes to “zREC” indication.
The TALLY indicators and the tally indicator on
the front panel of the viewfinder light as they do
during normal recording.
Note
During recording or in recording standby mode (when
“Cont” indication is lit), if you remove the media, the
battery, or the power source, the media needs to be
restored. It is not possible to restore media on a device
other than this camcorder.
Exit Clip Continuous Rec mode (see page 82) and then
remove the media.
When “Cont” indication is flashing (at 1 flash/s), you can
remove the media.