Sony PXW-X320 Operating Instructions Manual page 129

OPERATION
Item
Marker
Makes settings related to
marker display in the
viewfinder screen.
Gain Switch
Makes settings related to
the GAIN switch.
TLCS
Makes settings related to
total level control.
Sub-item Setting
–479 to 0 to 479
User Box H
Position
–464 to 0 to 464
User Box V
Position
Guide Frame On/Off
Gain Low –3dB/0dB/3dB/6dB/
9dB/12dB/18dB
Gain Mid –3dB/0dB/3dB/6dB/
9dB/12dB/18dB
Gain High –3dB/0dB/3dB/6dB/
9dB/12dB/18dB
Gain Turbo –3dB/0dB/3dB/6dB/
9dB/12dB/18dB/
24dB
Shockless Gain On/Off
Mode Backlight/Standard/
Spotlight
–99 to ±0 to +99
Speed
AGC On/Off
AGC Limit 18dB/12dB/9dB/
6dB/3dB
AGC Point F2.8/F4/F5.6
Auto Shutter On/Off
Auto Shutter 1/100 / 1/150 / 1/200 /
Limit 1/250
Auto Shutter F5.6/F8/F11/F16
Point
Description
Specifies the horizontal position of the
box cursor center.
Specifies the vertical position of the box
cursor center.
Turns display of the guide frame on/off.
Note
When "Center Marker," "Safety Zone,"
and "User Box" are set to "On", this setting
cannot be turned on.
Specifies the gain value for the L
position of the GAIN switch.
Specifies the gain value for the M
position of the GAIN switch.
Specifies the gain value for the H
position of the GAIN switch.
Specifies the gain value for the Turbo
Gain function, which can be assigned to
an assignable switch.
Turns shockless gain (a function that
switches smoothly when the gain is
switched) on/off.
Selects the auto iris mode used when the
TLCS system is activated.
Backlight: Backlight mode (lessens
the blackout of the main subject
that occurs under backlit
conditions)
Standard: Standard mode
Spotlight: Spotlight mode (lessens the
whiteout of the main subject that
occurs under a spotlight)
Specifies the control speed (speed of
reaction to changes in the video) used
when the TLCS system is activated.
(Larger values specify quicker reaction
times.)
Turns the AGC (auto gain control)
function on/off.
Specifies the maximum gain used when
AGC is on.
Specifies the F value where control by
auto iris switches to control by AGC,
used when AGC is on.
Turns the auto shutter function on/off.
Selects the maximum shutter speed used
when auto shutter is on.
Specifies the F value where control by
auto iris switches to control by auto
shutter, used when auto shutter is on.
129