Configuring A Shooting And Recording System; Tally And Call Indication - Sony PXW-X320 Operating Instructions Manual

Configuring a Shooting and Recording System

If you install the optional CBK-CE01 on this camcorder, you can attach the CA-FB70/TX70 Camera
Adaptor and connect a camera control unit. This allows you to configure a shooting and recording system
by connecting multiple camcorders, camera control units, and remote control units.
For more information about the CA-FB70 and CA-TX70, refer to their respective operation manuals.
Note
When using the camcorder in this system, do not connect a video light to the camcorder.

Tally and Call indication

The following table shows the tally or call indication when configuring system.
Recording Receiving data via
status communication
– Tally Green
Tally
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
ON OFF
ON OFF
ON OFF
ON OFF
ON ON
ON ON
ON ON
ON ON
Note
While the CA-FB70/TX70 Camera Adaptor is connected, alarm indication by the tally lamp that is listed in "Warning
Indication" is not performed.
LED indicator of
DXF
Call Call from REC/
from other than TALLY
CA CA LED
OFF OFF OFF
OFF ON ON
ON OFF OFF
ON ON ON
OFF OFF OFF
OFF ON ON
ON OFF OFF
ON ON ON
OFF OFF ON
OFF ON OFF
ON OFF ON
ON ON OFF
OFF OFF ON
OFF ON OFF
ON OFF ON
ON ON OFF
Character display in the viewfinder
GREEN "z" (red)
& TAKE indicator
TALLY
LED
OFF No display
OFF "z" (red)
OFF No display
OFF "z" (red)
ON No display
ON "z" (red)
ON No display
ON "z" (red)
OFF "z" (red)
OFF No display
OFF "z" (red)
OFF No display
ON "z" (red)
ON No display
ON "z" (red)
ON No display
185
"z" (green) "CALL"
indicator indicator
No display No display
No display "CALL" (red)
No display "CALL" (red)
No display "CALL" (red)
"z" (green) No display
"z" (green) "CALL" (red)
"z" (green) "CALL" (red)
"z" (green) "CALL" (red)
No display No display
No display "CALL" (red)
No display "CALL" (red)
No display "CALL" (red)
"z" (green) No display
"z" (green) "CALL" (red)
"z" (green) "CALL" (red)
"z" (green) "CALL" (red)