Sony PXW-X320 Operating Instructions Manual page 166

Assignable SW setting
Lens Info
Zoom Tele/Wide
Zoom Wide/Tele
Manual Focus Assist
Focus Mag
Zebra
Lens RET
a)
Return Video
Return Video2
Return Video3
Return Video4
Shot Mark1
Shot Mark2
OK Mark
Clip Flag OK
Clip Flag NG
Clip Flag Keep
Color Temp SW 3200K
Color Temp SW 4300K
Color Temp SW 5600K
Color Temp SW 6300K
Function
Switch the depth of field indication between off, displayed in
meters, and displayed in feet.
When a lens that supports serial communication is installed,
assign the Zoom Tele function to ASSIGNABLE 4, and
assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
When a lens that supports serial communication is installed,
assign the Zoom Wide function to ASSIGNABLE 4, and
assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
Turn the manual focus assist function on/off.
Turn the focus magnification function on/off.
Turn zebra display on/off.
Display return video signals when the optional CBK-CE01 is
installed and a camera control unit is connected.
When a camera control unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review (if playback
is allowed).
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor and camera control unit are connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Add/clear an OK flag to/from the clip being recorded or
played.
Add/clear an NG flag to/from the clip being recorded or
played.
Add/Clear a KP flag to/from the clip being recorded or
played.
Adjust the white balance with a 3200K preset value.
Adjust the white balance with a 4300K preset value.
Adjust the white balance with a 5600K preset value.
Adjust the white balance with a 6300K preset value.
166
State when
camcorder is next
powered on
Setting retained
—
—
Setting retained
Setting not retained
Setting not retained
—
—
—
—
—
—
—
—
Setting not retained
Setting not retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained