Sony PXW-X320 Operating Instructions Manual page 25

Top of viewfinder screen
a Extender indicator [M]
Indicates the setting of the digital extender
function (when optional CBK-CE01 is installed)
of this camcorder and the setting of the lens
extender.
EX: The lens extender is on.
08: The lens shrinker is on.
x2D: The digital extender function of this
camcorder is on.
Ex2D: The lens extender and the digital extender
function of this camcorder are both on.
Digital extender function can be turned on or off
by an assignable switch to which Digital Extender
is assigned.
b Zoom position (when the lens is
mounted) [M]
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
c Focus position (when the serial lens is
mounted) [M]
Indicates the focus position as distance to the
subject (in units of m).
d Green tally indicator
Lights when the camcorder is the following
states.
• "MAINTENANCE" > "Camera Config" > "HD
SDI Remote I/F" is set to "G-Tally" in the setup
menu and a recording control signal is output
from the HD/SD SDI OUT connector.
• Green tally signal received (when a camera
adaptor is mounted on the camcorder and a
camera control unit is connected)
e Media status
Displays the name of the currently active media
slot (A or B).
f Recording mode/operation status
indicator
Indicator
zREC
.
E
xt
STBY
zCACHE
zINT REC
zINT STBY
INT STBY
zFRM REC
zFRM STBY
FRM STBY
zS&Q REC
S&Q STBY
zSML REC
SML STBY
zCALL
BREVIEW
g Wireless receiver reception level
When a wireless receiver is installed in the
camcorder, "W" appears together with the
following four segment reception level indicators
for each of the channels (1 to 4) that can be used
by the receiver.
In normal situation: The number of white
segments indicates the strength of the signal
level.
Muting (for an analog receiver) or error rate
aggravation (for a digital receiver): The
number of gray segments indicates the
strength of the signal level.
Reception level over peak: "P" is displayed
instead of the indicators.
Tuner battery is low: The channel number and
indicator of the corresponding channel
flash.
1) When an optional DWR-S02D is used
25
Meaning
Recording in progress
Standby for recording
Standby in Picture Cache mode
Recording in progress in
Interval Rec mode
Standby for next recording in
Interval Rec mode
Standby in Interval Rec mode
Recording in progress in Frame
Rec mode
Standby for next recording in
Frame Rec mode
Standby in Frame Rec mode
Recording in progress in Slow
& Quick Motion mode
Standby in Slow & Quick
Motion mode
2-slot recording in Simul Rec
mode
Standby for 2-slot recording in
Simul Rec mode
Being called from a connected
device
During recording review
1)
1)