Table 30-3 Command Summary: Configure Mode - ZyXEL Communications GS-3012 User Manual

30.9.3 Configure Mode
The following table lists the commands in Configuration (or Config) mode.
admin-password <pw-string>
<confirm-string>
bandwidth-
control
bcp-
transparency
classifier <name>
<[packet-format
<802.3untag|802.3ta
g|
EtherIIuntag|EtherI
Itag>] [priority
<0-7>]
[vlan <vlan-id>]
[ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port <port-
num>] [destination-
mac <dest-mac-
addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|eg
p|ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-ip-
addr> [mask-bits
<mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-socket
<socket-num>]
[inactive]>
Introducing the Commands

Table 30-3 Command Summary: Configure Mode

COMMAND
GS-3012/GS-3012F User's Guide
DESCRIPTION
Changes the administrator
password.
Enables bandwidth control.
Enables Bridge Control Protocol
Transparency.
Configures a classifier. A classifier
groups traffic into data flows
according to specific criteria such
as the source address, destination
address, source port number,
destination port number or
incoming port number.
30-11