Viewing And Editing Classifier Configuration; Figure 18-2 Classifier: Summary Table; Table 18-2 Classifier: Summary Table - ZyXEL Communications GS-3012 User Manual
Gigabit ethernet switch
Hide thumbs
Also See for GS-3012:
- User manual (300 pages) ,
- Cli reference manual (250 pages) ,
- Release note (25 pages)
Table of Contents
Advertisement
GS-3012/GS-3012F User's Guide
LABEL
Socket Number
You must select either UDP or TCP in the IP Protocol field before you configure
Select Any to apply the rule to all TCP/UDP protocol port numbers or select the second
option and enter a TCP/UDP protocol port number.
Destination
IP Address/Address
Enter a destination IP address in dotted decimal notation.
Prefix
Specify the address prefix by entering the number of ones in the subnet mask.
Socket Number
You must select either UDP or TCP in the IP Protocol field before you configure
Select Any to apply the rule to all TCP/UDP protocol port numbers or select the second
option and enter a TCP/UDP protocol port number.
Add
Click Add to insert the entry in the summary table below.
Cancel
Click Cancel to reset the fields back to your previous configuration.
Clear
Click Clear to set the above fields back to the factory defaults.
18.3 Viewing and Editing Classifier Configuration
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the Classifier
screen. To change the settings of a rule, click a number in the Index field.
When two rules conflict with each other, a higher layer rule has priority over lower layer rule.
The following table describes the labels in this screen.
LABEL
Index
This field displays the index number of the rule. Click an index number to edit the rule.
Active
This field displays Yes when the rule is activated and No when is it deactivated.
Name
This field displays the descriptive name for this rule. This is for identification purpose only.
Rule
This field displays a summary of the classifier rule's settings.
Delete
Click Delete to remove the selected entry from the summary table.
18-4
Table 18-1 Classifier
the socket numbers.
the socket numbers.
Figure 18-2 Classifier: Summary Table
Table 18-2 Classifier: Summary Table
DESCRIPTION
DESCRIPTION
Classifier
Advertisement
Table of Contents
