Figure 10-1 Spanning Tree Protocol: Status; Table 10-3 Spanning Tree Protocol: Status - ZyXEL Communications GS-3012 User Manual

The following table describes the labels in this screen.
LABEL
Spanning Tree Protocol
Bridge
Bridge ID
Hello Time (second)
Max Age (second)
Forwarding Delay
(second)
Cost to Bridge
Spanning Tree Protocol

Figure 10-1 Spanning Tree Protocol: Status

Table 10-3 Spanning Tree Protocol: Status

This field displays Running if STP is activated. Otherwise, it displays Down.
Root refers to the base of the spanning tree (the root bridge). Our Bridge is this switch.
This switch may also be the root bridge.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC
address. This ID is the same for Root and Our Bridge if the switch is the root switch.
This is the time interval (in seconds) at which the root switch transmits a configuration
message. The root bridge determines Hello Time, Max Age and Forwarding Delay
This is the maximum time (in seconds) a switch can wait without receiving a
configuration message before attempting to reconfigure.
This is the time (in seconds) the root switch will wait before changing states (that is,
listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
GS-3012/GS-3012F User's Guide
DESCRIPTION
10-3