ZyXEL Communications GS-3012 User Manual page 204

GS-3012/GS-3012F User's Guide
radius-server
remote-management
running-config
service-control
snmp-server
spanning-tree
ssh
system-information
time
timesync
trunk
vlan
vlan1q
ssh <1|2> <[user@]dest-
ip>
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
write memory
30-10
Table 30-2 Command Summary: Enable Mode
COMMAND
<port-list>
<index>
config
key <rsa1|rsa|dsa>
known-hosts
session
<vlan-id>
gvrp
port-isolation
<index>
DESCRIPTION
Displays port security settings on the
specified port(s).
Displays RADIUS server settings.
Displays all secured client information.
Displays the specified secured client
information.
Displays current operating configuration.
Displays service control settings.
Displays SNMP settings.
Displays Spanning Tree Protocol (STP)
settings.
Displays general SSH settings.
Displays the SSH public and private
keys
Displays known SSH hosts information.
Displays current SSH session(s).
Displays general system information.
Displays current system time and date.
Displays time server information.
Displays link aggregation information.
Displays the status of all VLANs.
Displays the status of the specified
VLAN.
Displays GVRP setting.
Displays port isolation setting.
Connects to an SSH server with the
specified SSH version.
Determines the path a packet takes to a
device.
Saves the configuration to the
configuration file the switch is currently
using.
Saves the configuration to the specified
configuration file on the switch.
Introducing the Commands