Link Aggregation Setup; Table 14-1 Link Aggregation: Link Aggregation Protocol Status - ZyXEL Communications GS-3012 User Manual

The following table describes the labels in this screen.

Table 14-1 Link Aggregation: Link Aggregation Protocol Status

LABEL
Index This field displays the trunk ID to identify a trunk group, that is, one logical link containing
multiple ports.
Aggregator ID Refer to Figure 14-1 for more information on this field.
Enabled Port These are the ports you have configured in the Link Aggregation screen to be in the trunk
group.
Synchronized Ports These are the ports that are currently transmitting data as one logical link in this trunk group.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to halt statistic polling.

14.3 Link Aggregation Setup

Click Configuration in the Link Aggregation Protocol Status screen to display the screen shown next.
You can configure up to six link aggregation groups and each group can aggregate up to six ports.
Link Aggregation
GS-3012/GS-3012F User's Guide
DESCRIPTION
14-3