Epson U590P Information Manual page 74

Command Name Function
GS V Select cut mode Cuts the specified
and cut paper paper.
GS V Select cut mode Advances the specified
and cut paper paper to the cut
position and performs
the cut.
GS W Set printing area Sets the printing area
width width to a defined area.
GS \ Set relative Moves the vertical print
vertical print starting position in page
position in page mode to a specified
mode distance from the
current position.
GS ^ Execute macro Executes a macro.
GS a Enable/disable Selects a status for ASB
Automatic Status transmission.
Back (ASB)
GS b Turn smoothing Turns smoothing mode
mode on/off on or off.
GS c Print counter Stores a serial counter
value in the print buffer
and increments or
decrements the counter
value.
GS f Select font Selects a font for the HRI
for HRI characters characters used when
printing a bar code.
GS h Set bar code Sets the height of a bar
height code.
The commands supported by each printer are marked by a
TM- TM-300/300M
TM- TM-
T88/
T85 L60II
A B C D
T88M
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-U200 TM- TM-
TM-
U375/ H5000/
U925
B D
U375M H5000M
TM- TM-
TM- TM-
U950/ U590/
295 215S
U950M U590M