Epson U590P Information Manual page 47

CONFIDENTIAL
FS b retransmits the previous check paper reading results. The transmitted information is the same
as that previously sent by FS a 0. If FS a 0 is not executed before FS b, the printer transmits the
reading status as "not normal".
PRINT #1, CHR$(&H1C);"b";
FS a 1
[Name]
[Format]
FS a 1 loads check paper to the print starting position. After loading the check paper, the printer
cancels the MICR function and automatically selects slip paper as the print sheet. This command is
ignored unless the MICR function is selected.
PRINT #1, CHR$(&H1C);"a1";
PRINT #1, "AAAAA"; CHR$(&HA);
FS a 2
[Name]
[Format]
FS a 2 ejects the check paper. After ejecting the check, the printer cancels the MICR function and
automatically selects the slip paper as the print sheet. This command is ignored unless the MICR
function is selected.
PRINT #1, CHR$(&H1C);"a2";
1-40 Command Descriptions
Program Example
Load check paper to print starting position
ASCII FS
Hex 1C
Decimal 28
Program Example
Eject check paper
ASCII FS
Hex 1C
Decimal 28
Program Example
a 1
61 31
97 49
a 2
61 32
97 50
Rev. A