Epson U590P Information Manual page 73

Command Name Function
GS < Initialize printer Feeds a label to the
mechanism print starting position.
GS A Adjust label Adjusts the label
position to start position relative to the
printing default position.
GS B Turn white/black Turns white/black
reverse printing reverse printing mode
mode on/off on or off.
GS C 0 Select counter Selects a print mode for
print mode the serial counter.
GS C 1 Select count Selects a count mode
mode (A) for the serial counter.
GS C 2 Set counter Sets the serial counter
value.
GS C ; Select count Selects a count mode
mode (B) for the serial counter
and specifies the
counter value.
GS E Select head Selects the print speed
control method and head energizing
time.
GS H Select printing Selects the printing
position of HRI position of HRI
characters characters when
printing a bar code.
GS I Transmit printer ID Transmits a specified
printer ID.
GS L Set left margin Sets the left margin
using specified values.
GS P Set horizontal and Sets the horizontal and
vertical motion vertical motion units.
units
The commands supported by each printer are marked by a
TM- TM-300/300M
TM- TM-
T88/
T85 L60II
A B C D
T88M
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-U200 TM- TM-
TM-
U375/ H5000/
U925
B D
U375M H5000M
TM- TM-
TM- TM-
U950/ U590/
295 215S
U950M U590M