Epson U590P Information Manual page 14

CONFIDENTIAL
ESC e n
[Name]
[Format]
[Range]
ESC e n prints the data in the print buffer and feeds n × line spacing in the reverse direction. The
amount of paper fed per line is based on the value set using ESC 2 or ESC 3. The maximum reverse
paper feed amount is 40 inches. The default setting of the paper feed amount is 1/6 inch.
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1B);"e";CHR$(1);
PRINT #1, "
FF
[Name]
[Format]
FF prints the data in the print buffer and ejects the slip paper. The amount of paper fed is based on
the value set using ESC C. The slip is ejected in the direction specified by ESC F.
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HC);
Rev. A
Print and reverse feed n lines
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
Program Example
CCCCC"; CHR$(&HA);
Print and eject cut sheet
ASCII FF
Hex 0C
Decimal 12
Program Example
TM–U590/U590P Information Manual
e n
65 n
101 n
AAAAACCCCC
BBBBB
AAAAA
BBBBB
Eject the sheet
Print Sample
Paper reverse fed one line after
printing the line of Bs
Print Sample
Command Descriptions 1-7