Epson U590P Information Manual page 16

CONFIDENTIAL
ESC C n
[Name]
[Format]
[Range]
ESC C n sets the eject length for slip paper to n × line spacing. The maximum eject length is 17.72
inches. The default setting of the eject length is n = 0. No eject length is set if n=0. When n=0, the
paper is fed until it can be ejected.
If the printer cannot detect the edge of the sheet after feeding the sheet for maximum value
(17.72 inches), it is a slip ejection error (recoverable error).
PRINT #1, CHR$(&H1B);"C";CHR$(8); ←
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HC);
Rev. A
Set cut sheet eject length
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
Program Example
Set eject length
TM–U590/U590P Information Manual
C n
43 n
67 n
AAAAA
BBBBB
Print Sample
Eject length set to 8
lines using ESC C
Command Descriptions 1-9