Epson U590P Information Manual page 69

Command Name Function
ESC \ Set relative print Sets the print starting
position position based on the
current position.
ESC a Select justification Aligns all the data in
one line to a specified
position.
ESC c 0 Select paper Selects paper type(s) for
type(s) for printing printing.
ESC c 1 Select paper Selects paper type(s) for
type(s) for use with various
command command settings.
settings
ESC c 3 Select paper Selects paper sensor(s)
sensor(s) to output to output paper-end
paper-end signals signals.
ESC c 4 Select paper Selects the paper
sensor(s) to stop sensor(s) that stops
printing printing when the paper
runs out.
ESC c 5 Enable/disable Enables or disables the
panel buttons panel buttons.
ESC d Print and feed n Prints the data in the
lines print buffer and feeds n
lines.
ESC e Print and reverse Prints the data in the
feed n lines print buffer and feeds n
lines in the reverse
direction.
The commands supported by each printer are marked by a
TM- TM-300/300M
TM- TM-
T88/
T85 L60II
A B C D
T88M
O O O O O O O
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-U200 TM- TM-
TM-
U375/ H5000/
U925
B D
U375M H5000M
O O O O
TM- TM-
TM- TM-
U950/ U590/
295 215S
U950M U590M
O O O