Epson U590P Information Manual page 67

Command Name Function
ESC – Turn underline Turns underline mode
mode on/off on or off.
ESC 2 Select default line Sets the line spacing to
spacing 1/6 inch.
ESC 3 Set line spacing Sets the line spacing to
a specified value.
ESC < Return home Moves the print head to
the home position.
ESC = Select peripheral Selects the device to
device which the host
computer sends data.
ESC ? Cancel user- Cancels the user-
defined defined characters for a
characters specified character
code.
ESC @ Initialize printer Clears the data in the
print buffer and resets
the printer mode to the
mode that was in effect
when the power was
turned on.
ESC C Set cut sheet Sets the eject length for
eject length a cut sheet to a
specified number of
lines.
ESC D Set horizontal tab Sets the horizontal tab
positions positions.
ESC E Turn emphasized Turns emphasized
mode on/off mode on or off.
ESC F Set/cancel cut Sets or cancels the cut
sheet reverse sheet reverse eject.
eject
The commands supported by each printer are marked by a
TM- TM-300/300M
TM- TM-
T88/
T85 L60II
A B C D
T88M
O O O O
O O O O
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-U200 TM- TM-
TM-
U375/ H5000/
U925
B D
U375M H5000M
TM- TM-
TM- TM-
U950/ U590/
295 215S
U950M U590M