Epson U590P Information Manual page 70

Command Name Function
ESC f Set cut sheet wait Sets the time that the
time printer waits for cut
sheet to be inserted and
the time from insertion
of the sheet until printing
starts.
ESC i Partial cut (one Executes a partial cut of
point left uncut) the paper with one
point left uncut.
ESC m Partial cut (three Executes a partial cut of
points left uncut) the paper with three
points left uncut.
ESC o Stamp Executes stamp printing.
ESC p Generate pulse Outputs a specified
pulse to a specified
connector pin.
ESC q Paper release Releases the paper.
ESC r Select print color Selects the print color.
ESC t Select character Selects a page from
code table the character code
table.
ESC u Transmit Transmits the status of a
peripheral device specified connector
status pin.
ESC v Transmit paper Transmits the status of a
sensor status paper sensor.
ESC z Turn parallel Turns parallel printing
printing mode on/ mode on or off for
off for receipt receipt and journal
and journal paper paper.
The commands supported by each printer are marked by a
TM- TM-300/300M
TM- TM-
T88/
T85 L60II
A B C D
T88M
O
O O O O
O O O O
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-U200 TM- TM-
TM-
U375/ H5000/
U925
B D
U375M H5000M
O
TM- TM-
TM- TM-
U950/ U590/
295 215S
U950M U590M