Ford RANGER Owner's Manual page 31

Press and hold the unlock and lock buttons
on the remote control simultaneously for
at least four seconds with the ignition off.
The direction indicators will flash twice to
confirm the change.
To return to the original unlocking function,
repeat the process.
Programming the additional key
Note: You will need to have two
programmed keys for this procedure.
1. Insert the first key and turn the ignition
on.
2. Remove the key within 10 seconds.
3. Insert the second key within 10 seconds
and turn the ignition on.
4. Remove the key within 10 seconds.
5. Insert the additional key within 10
seconds which need to be
programmed.
Changing the Remote Control
Battery
Make sure that you dispose of
old batteries in an
environmentally friendly way.
E107998
Seek advice from your local authority
regarding recycling.
Keys and Remote Controls
Remote Control With a Folding Key
Blade - Vehicles Equipped with
HPAS
1
E128809
1. Insert a screwdriver as far as possible
into the slot on the side of the remote
control, gently push the clip.
2. Press the clip down to release the
battery cover.
E128810
3. Carefully remove the cover.
29
2