Ford RANGER Owner's Manual page 107

Hide thumbs Also See for RANGER:
Table of Contents

Advertisement

E206133
Use the power point for powering electric
devices that require up to 150 watts. The
power point is located on the rear of the
center console.
When the indicator light on the power point
is:
On: The power point is working, the
ignition is on and a device is plugged
in.
Off: The power point is off, the ignition
is off or no device is plugged in.
Flashing: The power point is in fault
mode.
The power point temporarily turns off
power when in fault mode if the device
exceeds the 150 watt limit. Unplug any
device and switch the ignition off. Switch
the ignition back on, but do not plug your
device back in. Let the system cool off and
switch the ignition off to reset the fault
mode. Switch the ignition back on and
make sure the indicator light remains on.
The power point is not designed for electric
devices such as:
Cathode-ray, tube-type televisions.
Motor loads, such as vacuum cleaners,
electric saws and other electric power
tools or compressor-driven
refrigerators.
Auxiliary Power Points
105
Measuring devices, which process
precise data, such as medical
equipment or measuring equipment.
Other appliances requiring an
extremely stable power supply such as
microcomputer-controlled electric
blankets or touch-sensor lamps.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ranger 2015

Table of Contents