Ford RANGER Owner's Manual page 142

Hide thumbs Also See for RANGER:
Table of Contents

Advertisement

Note: Some add-on equipment can cause
reduced performance or false activation.
For example, large trailer hitches, bike or
surfboard racks.
Note: The parking aid system sensors must
be kept clean and free from snow or ice to
avoid reduced performance or false
activation. Do not clean the sensors with
sharp objects.
Note: If the parking aid sensors are
misaligned due to vehicle bumper damage
it will cause reduced performance or false
activation.
The rear parking aid sensors turn on
automatically when you move the
transmission selector lever to R (reverse)
and your vehicle is moving at a speed of
less than 5 km/h. Moving your vehicle
closer to a large object will increase the
audible warning repeat rate. When the
object is less than 30 cm from the center
of your vehicle's rear bumper the audible
warning will sound continuously.
Parking Aids
E205544
A
Note: There is a decreased coverage area
at the outer corners.
The system detects large objects when
you move the transmission selector lever
to R (reverse):
Your vehicle is moving backward at low
speed.
Your vehicle is stationary.
Move the transmission selector lever from
R (reverse) or press the parking aid button
to switch the system off. If a fault is
present in the system, a warning message
appears in the information display and
does not allow you to switch the system
on. See Information Messages (page
76).
140
Sensor coverage area is up to
180 cm (71 in) from the rear
bumper.
A

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ranger 2015

Table of Contents