Ford RANGER Owner's Manual page 267

I Cursor arrows: Press a button
to scroll through on-screen
choices.
J TA: Press the button to turn
traffic announcements on or off
and cancels announcements
during an active announcement.
K Door lock indicator.
L Hazard warning flasher switch.
M Door lock button.
N MENU: Press the button to
access different audio system
features.
O SOUND: Press the button to
adjust the sound settings for
bass, treble, middle, balance and
fade.
P AUX: Press the button to access
the AUX and SYNC features, it
will also cancel the menu or list
browsing.
Q RADIO: Press the button to
select different radio bands, it
will also cancel the menu or list
browsing.
On, Off Control
Press the On, Off control. This will also
operate the unit for up to one hour with the
ignition turned off.
The radio will switch off automatically
after one hour.
Sound Button
This will allow you to adjust the sound
settings (for example bass, middle and
treble).
1. Press the SOUND button.
2. Use the up and down arrow buttons to
select the required setting.
Audio System
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
Waveband Button
Press the RADIO button to select from the
wavebands available.
You can use the selector to return to radio
reception when you have been listening to
another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.
Station Tuning Control
Seek Tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual Tuning
1. Press the MENU button.
2. Select RADIO mode and then manual
tune.
3. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
4. Press OK to continue listening to a
station.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
1. Press the MENU button.
2. Select RADIO mode and then scan.
3. Use the seek buttons to scan up or
down the selected waveband.
265