HYOSUNG GT250 REi Owner's Manual page 92

★ ★ WASHING YOUR motorcycle
With some care, your motorcycle can be
washed in a similar manner to washing an
automobile.
N O T E
Avoid spraying or allowing water to flow
over the following places :
● ● Ignition switch
● ● Spark plugs
● ● Fuel tank cap
● ● Electric fuel injection system
(For 『 『
● ● Carburetor (For 『 『
● ● Brake master cylinders
● ● Oil cooler fins
● ● Snorkel air intake for air cleaner
CAUTION
Do not use parts cleaner to throttle body
and electric fuel injection sensors.
Use a garden hose at low pressure to
remove the majority of dirt or other debris.
Wash your motorcycle by hand with a mild
soap or detergent and water. Try to
thoroughly remove all dirt and debris without
excessive water pressure. Cloth rags,
washing mitts or cleaning brushes can be
used, be careful with brushes as they may
scratch plastic or painted surfaces. Rinse
the motorcycle thoroughly with clean water.
Dry all areas using a chamois or soft
absorbent cloth.
』 』 )
』 』 )
91
★ ★
WINDSHIELD CLEANING
Clean the windshield with a soft cloth and
warm water with a mild detergent.
If scratched, polish with commercially
available plastic polish.
Replace the windshield if it becomes
scratched or discolored so as to obstruct
view.
When replacing the windshield, use a
Hyosung replacement windshield.
CAUTION
Cleaning with any alkaline or strong
acid cleaner, gasoline, brake fluid, or
any other solvent will damage the
windshield.
Clean only with a soft cloth and warm
water with a mild detergent.