HYOSUNG GT250 REi Owner's Manual page 53

CAUTION
If the LCD display panel ② ② indicates "FI"
letters, and the "FI" check lamp "
comes on and remains lit, it means that
the electric fuel injection system is not
operating correctly. Stop the engine
immediately and contact an authorized
Hyosung dealer. Do not use the
motorcycle with disabled electric fuel
injection system, in order to avoid
damaging the engine components.
⊙ ⊙ WHEN THE 『 『
STARTING :
■ ■ When the engine is cold :
" ① ①
If the ambient temperature is below 5° C
(40° F ) :
1. Pull the choke lever to the ENGAGE
position.
2. Apply the rear brake pedal.
3. Squeeze the clutch lever and push the
electric starter switch.
4. Immediately after the engine starts, return
the choke lever halfway.
5. When the engine is sufficiently warmed
up, move the choke lever to the "OFF"
position.
If the ambient temperature is at or above
5° C (40° F ) :
1. Pull the choke lever to the ENGAGE
position halfway.
2. Apply the rear brake pedal.
3. Squeeze the clutch lever and push the
electric starter switch.
4. When the engine is sufficiently warmed
up, move the choke lever to the "OFF"
position.
If the ambient temperature is above 20° ° C
(68° ° F), operation of the choke is not
necessary to start the engine.
Operation of the choke can make the
engine hard to start due to too rich
fuel/air mixture.
52
N O T E
』 』