Oil Pumps - KTM 2003 950 Adventure Repair Manual

4-15
1
2
3
7
8

Oil pumps

– Remove the lock ring
– Pull the needle roller
4
– Loosen the bolts on the outer oil pump
NOTE: the centering pins are usually retained in the oil pump housing;
5
if they are retained, pull them out with pliers.
– Remove the inner oil pump
6
– Remove the suction pump's inner and outer rotor (
– Pull the needle roller
9
– Pull the oil pump shaft and the two pressure pump rotors out of the
– Remove both rotors from the oil pump shaft and pull out the needle
1
spacing washer and oil pump gear
2
4
washer underneath.
remove the oil pump housing.
the oil pump shaft.
out of the oil pump shaft.
9
engine housing.
roller.
from the oil pump shaft; remove the
.
3
out of the pump gear and remove the
(pressure pump) and
5
(suction pump).
6
7
and ) from
8